Update Firmware HP 1910 Switches

 

So I was updating the firmware on a HP 1910 switch and though I would share a quick how to with everyone. Here it goes.

 

 

 

You can remotely download Boot ROM and system software images from a TFTP server at the CLI as

follows.

Step 1: Configure an IP address for the switch

<HP V1910 Switch>ipsetup ip-address 192.168.1.2 24

Step 2: Download the system software image file from the TFTP server.

<HP V1910 Switch>upgrade 192.168.1.1 update.bin runtime

The file flash:/ main.bin exists. Overwrite it? [Y/N]:y

Verifying server file...

Deleting the old file, please wait...

File will be transferred in binary mode

Downloading file from remote TFTP server, please wait.../

TFTP: 10262272 bytes received in 104 second(s)

File downloaded successfully.

The specified file will be used as the boot file at the next reboot.

Step 3: Download and load the Boot ROM file.

<HP V1910 Switch>upgrade 192.168.1.1 update.btm bootrom

File will be transferred in binary mode

Downloading file from remote TFTP server, please wait...|

TFTP: 259324 bytes received in 2 second(s)

File downloaded successfully.

BootRom file updating finished!

Step 4: Reboot the device to validate the new system software.

<HP V1910 Switch> reboot

Note that if flash memory is insufficient, load the Boot ROM image first and delete useless files to free up

Flash memory before you load the system software image.

 

 

 

If you need 99.999% up-time and need local support in Northern California and Nevada, give us a call @ 775-552-3611. As always, our services are guaranteed and best yet no monthly contracts! So call and ask about a free 30 day trial.

Now servicing Minden, Reno, Gardnerville, Carson City and South Lake Tahoe.